List of Top 9 Best jtag emulators in 2021

How We Score

Our Score is a ranking system developed by our team of experts. It from 0 to 10 are automatically scored by our AI tool based upon the data collected. This score has no relationship or impact from any manufacturer or sales agent websites.

In this article we will take a look at some of the best chosen jtag emulators . We would recommend using SETCTOP High Speed USB JTAG Emulator Debugger Programmer V9 ARM ARM9 ARM7 Cortex M0/M1/M3/M4, Cortex A5/A8/A9 STM32 STM8 Debug Probes as it is available at reasonable price

Best jtag emulators Review :

Scicalife USB JTAG Emulator Debugger Programmer V9 ARM Emulator High-Speed Download Black Cable

 in stock
2 new from $39.25
Free shipping
Amazon.com
as of February 3, 2022 2:08 am

Features

  • It has a wide range of use and supports a variety of standard compilation environments. Universal Programmer Seat Boundary Scan Device
  • This product is simple to operate, easy to connect, easy to use and learn, it is your excellent choice.
  • Compared with V8 JTAG Debugger, this emulator is more stable and durable, and the firmware will not be shut down suddenly.
  • It is made of safe and gentle materials, has a long service life and will not be easily damaged.
  • You can buy this efficient and practical V9 JTAG Emulator at a reasonable price.

ElecBit High Speed USB JTAG Emulator Debugger Programmer V9,CP2102 USB to 5PIN UART TTL,Support 1.8V 3.3V 5V, ARM ARM9 ARM7 Cortex M0/M1/M3/M4, Cortex A5/A8/A9 STM32 STM8 Debug Probes

 in stock
Amazon.com
as of February 3, 2022 2:08 am

Features

  • This hardware supports USB to UART and JTAG, and the voltage supports 1.8V 3.3V 5V.Support standard JTAG interface and 2-wire SWD debugging interface.
  • The Jtag main control chip uses STM32F205, can not afford to lose the firmware, hardware upgrade to the latest version of V9.4, can provide 3.3V voltage of 0.8A
  • Stable and reliable chipset CP2102,Baud rates: 300 bps to 1.5 Mbps,Connect MCU easily to your computer!Standard USB type A male and TTL 5pin connector. 5pins for 3.3V, RST, TXD, RXD, GND & 5V
  • Support IAR KEIL MDK,nRF51822 nRF52810 NRF52832 JLINK V9 DA14580 JLINKV9 SDW Emulation Debugger ARM Jtag Debugger Supports MDK/IAR/KEIL
  • Supports debugging of all ARM chips, supports MDK or IAR, and compile environment IDE supported by other standard J*Link standards.

ST-LINK/V2(CN Version) ST MCU Microcontroller STM8 STM32 JTAG SWD SWIM In-circuit Debugger Programmer Emulator @XYGStudy

 in stock
2 new from $46.99
Free shipping
Amazon.com
as of February 3, 2022 2:08 am

Features

  • Part Number: ST-LINK/V2 (CN)
  • ST-LINK/V2, in-circuit debugger/programmer for STM8 and STM32
  • The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
  • STM8 applications use the USB full speed interface to communicate with STMicroelectronic's ST Visual Develop (STVD) or ST Visual Program (STVP) software.
  • STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments

DollaTek Emulator V8 JTAG Adapter Converter EK1199

 in stock
Amazon.com
as of February 3, 2022 2:08 am

Features

  • This is a JTAG converter, which is a good choice for your ARM emulator.
  • It also supports new versions of MINI2440, TQ2440 and popular ARM boards.
  • This Adapter board for the common 20PIN2.54 spacing, 20PIN 2.0 spacing, 10PIN 2.54 spacing, 10PIN 2.0spacing, JTAG 14PIN 2.54 spacing.

SETCTOP High Speed USB JTAG Emulator Debugger Programmer V9 ARM ARM9 ARM7 Cortex M0/M1/M3/M4, Cortex A5/A8/A9 STM32 STM8 Debug Probes

 in stock
2 new from $34.98
Free shipping
Amazon.com
as of February 3, 2022 2:08 am

Features

  • SETCTOP High Speed V9 USB ARM JTAG Emulator Debugger V9 Emulator Programmer Debugger
  • 100% brand new and high quality Material: Plastic Color: Black Specifications Electromagnetic compatibility (EMC) EN 55022, EN 55024 Operating temperature +5°C ... +60°C Storage temperature -20°C ... +65 °C Relative humidity (non-condensing) Max. 90% rH Supported Operating Systems Microsoft Windows XP Microsoft Windows XP x64 Microsoft Windows 2003 Microsoft Windows 2003 x64 Microsoft Windows Vista Microsoft Windows Vista x64 Windows 7 Windows 7 x64 Windows 8 Windows
  • V9 description Supported CPUs: ARM7/9/11, Cortex-A5/A7/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4, Microchip PIC32 and Renesas RX100/RX200/RX610/RX621/RX62N/ RX62T/RX630/RX631/RX63N
  • Differences between V8 and V9: 1, the speed is different: V8 supports up to 10M (JTAG debug mode) / 4M (SDW debug mode), and V9 support to 20M (JTAG debug mode) / 15M (SDW debug mode). 2, the stability is different: V9 driver IC has a voltage self-adaptive ability, in the case of the correct wiring, automatically adapt to the target board cpu voltage. 1.8-5.5V cpu can be debugged, and V8 version can only debug 3.3v version of the cpu, and debugging 5vcpu stability is very poor.
  • 3, V8 easy to turn off the firmware into a brick. I have a lot of V8 hanging here, I want to re-write the firmware, and ordinary users can only look at bricks, and V9 basically no such situation. 4, some of the latest cpuV8 is no longer supported, and V9 supports almost all ARM cpu. V9 six characteristics: 1, the main control chip uses STM32F205, can not afford to lose the firmware, hardware upgrade to the latest version of V9.4 2, can provide 3.3V voltage of 0.8A

Sinkr ULINK2 Emulator Programmer Debugger for ARM Cortex-M4 Cortex-M3, Support for JTAG and SWD Debugging, Support for MDK5(KIT A)

 in stock
Amazon.com
as of February 3, 2022 2:08 am

Features

  • ✔️Support for the MDK5 IDE. Chips that can be supported include ARM7,ARM9,Cortex-M,Cortex-A(32bit)、8051(XC800、uPSD、LPC950)、C166 core(XC166、XE166、XC2000)
  • ✔️ULINK2 can be used to write HEX files and debug programs. Support memory read-write and terminal simulation during program operation.
  • ✔️Ulink2 can download code at high speed. The firmware of ULINK2 can be upgraded.
  • ✔️Supports serial debugging based on ARM -M3.Support memory read and write, terminal simulation and serial debug output during program operation.
  • ✔️Drivers can be provided by our customer service or downloaded in forum.

Emulator V8 JTAG Adapter Converter for J-Link with 8PCS 4 Pin 6 Pin 10 Pin 20 Pin Grey Flat Ribbon Data Cable Dupont Wire

 in stock
3 new from $11.88
Amazon.com
as of February 3, 2022 2:08 am

Features

Part Number45245

ST-LINK/V2 (EN Ver.) Microcontrollers ST STM8 and STM32 MCU USB JTAG SWD in-circuit debugger programmer emulator Brand New @XYGStudy

 in stock
2 new from $59.99
Amazon.com
as of February 3, 2022 2:08 am

Features

  • Part Number: ST-LINK/V2 (EN)
  • ST-LINK/V2, in-circuit debugger/programmer for STM8 and STM32
  • The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
  • STM8 applications use the USB full speed interface to communicate with STMicroelectronic's ST Visual Develop (STVD) or ST Visual Program (STVP) software.
  • STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.

The J-link OB ARM Emulator Debugger Programmer Downloader Instead Of V8 SWD - Arduino Compatible SCM & DIY Kits Programmer & Logic Analyzer - 1 x J-Link debugger, 1 x USB cable

 in stock
Amazon.com
as of February 3, 2022 2:08 am

Features

  • Arduino Compatible SCM & DIY Kits Programmer & Logic Analyzer - Product introduction: J-Link OB is developed by SEGGER, a series of independent simulation troubleshooting search, are generally to large companies on the evaluation board ( "on-board"), which is the suffix "OB" reason. This of named ldquo; Whether J-Link-? Simulation download de
  • J-Link OB simulation debugger against the original J-Link OB jtag interface, retains the swd interface, companies use the ARM kernel debug-MCU download.
  • Support object:
  • All swd interface with the ARM7 9 11 and Cortex M0's M2's M4's A5's A8's series embedded microcontroller.
  • The J-link OB ARM Emulator Debugger Programmer Downloader Instead Of V8 SWD - Arduino Compatible SCM & DIY Kits Programmer & Logic Analyzer - 1 x J-Link debugger, 1 x USB cable

The popular jtag emulators brands

One of the things we suggest to most of our readers is to buy the jtag emulators from a well-known brand. Good brands provide, good quality products, great customer support, and have service centers in different places around the country. Regarding the jtag emulators I have a preference for the products of the brands listed below.

  • SETCTOP
  • ElecBit
  • DollaTek
  • XYG-ST
  • Scicalife
  • XYG-AVR
  • Segger

    5 Things You need to consider when choosing the jtag emulators in 2021

    There are some things you should consider when buying a jtag emulators. We spent 22 hours researching the most important things you should consider when buying a jtag emulators. So should we start with the list of things you should consider?

    1. Budget and price matching

    Make a list of the things you want in your jtag emulators and the price you are willing to pay for it. So try to look for a product in that price range and choose the one that appeals to you the most. One tip we would like to give you is: don’t settle for a cheaper product if it doesn’t even have a function you need.

    Most jtag emulatorss fall within the price range of $ 34.98 to $ 539.95. Therefore, if budget is not a problem and you want the best product for your needs, we advise you to choose the SETCTOP High Speed USB JTAG Emulator Debugger Programmer V9 ARM ARM9 ARM7 Cortex M0/M1/M3/M4, Cortex A5/A8/A9 STM32 STM8 Debug Probes.

    If you want something medium range, choose ST-LINK/V2 (EN Ver.) Microcontrollers ST STM8 and STM32 MCU USB JTAG SWD in-circuit debugger programmer emulator Brand New @XYGStudy. If you have a very low budget, you can choose the one that is the Segger Jtag Emulator, USB, for Arm – 8.08.00 J-Link

    2. Does it have all the features you need?

    Most importantly, the jtag emulators you are purchasing should have all the features you are looking for. In case you don’t even have one, don’t buy! We are saying this because you will not be able to use it for that purpose. If you are a person without budget problems, I would suggest you to choose the best model which is Segger Jtag Emulator, USB, for Arm – 8.08.00 J-Link

    3. The brand

    Buying the jtag emulators from a reputable brand can actually make sense. Not only will it be better than others in terms of “build quality”, but it will also have some extra features, better customer support. Famous brands have multiple service centers across the country, so if you have any problems you can simply take your jtag emulators to one of their service centers.

    4. Warranty Matters!

    When you buy a jtag emulators from a well-known brand, you will get a guarantee. Low-cost products also come with warranties, but the claim process could be tougher. That’s why I always suggest you buy the product from a reputed brand and the one that comes under warranty. It will save you from repair costs in the future. On average, around 21% of people end up paying 40% of the product price for the service! You can save on service costs if the product is under warranty!

    5. Check out our website

    On our website we have experts in all categories and no matter what the product is, we have a better review or list about it. The products on our list are based on expert picks, advice and hours of research. That’s why when you buy something that’s listed on our best list, you won’t regret it. However, there is a possibility that we may not have covered the product you might be interested in, but if you come across something like this, please let us know via comments or contact us.

    FAQs

    What is the best jtag emulators?

    The best jtag emulators is the one that has all the features that meet your needs. I think the best is SETCTOP High Speed USB JTAG Emulator Debugger Programmer V9 ARM ARM9 ARM7 Cortex M0/M1/M3/M4, Cortex A5/A8/A9 STM32 STM8 Debug Probes

    Are there any good deals on jtag emulators?

    In the offline market, you won’t find many offers. However, I have chosen the best dual visor jet helmet and have added links to Amazon which has deals and deals running on a regular basis.

    What is the cheapest jtag emulators?

    Although most of the cheaper dual visor jet helmets do not have many features, but if you are looking for the best one at a low cost, my best bet would be on Segger Jtag Emulator, USB, for Arm – 8.08.00 J-Link

    Where can I buy the jtag emulators?

    There are several places where you can buy it, but in my opinion, when it comes to the online marketplace, I wouldn’t recommend anything other than Amazon. It’s because their service is great!

    Why should you trust our website?

    We have been in the review business for more than 15 years and our motive is to help people buy the top rated products at the best price. We went through 22 to help you find the best jtag emulators

    The verdict

    We hope you liked the jtag emulatorss that we have listed in our best list. If it was helpful, bookmark our site and share it with people you know whenever they intend to buy something.
    To conclude this guide,

  • If you are looking for the best jtag emulators: you should consider the idea of SETCTOP High Speed USB JTAG Emulator Debugger Programmer V9 ARM ARM9 ARM7 Cortex M0/M1/M3/M4, Cortex A5/A8/A9 STM32 STM8 Debug Probes
  • If you want the one that has similar characteristics to the best, then you should consider ElecBit High Speed USB JTAG Emulator Debugger Programmer V9,CP2102 USB to 5PIN UART TTL,Support 1.8V 3.3V 5V, ARM ARM9 ARM7 Cortex M0/M1/M3/M4, Cortex A5/A8/A9 STM32 STM8 Debug Probes
  • If you want a jtag emulators that is “value for money”, choose DollaTek Emulator V8 JTAG Adapter Converter EK1199
  • If you want the cheapest jtag emulators, then Segger Jtag Emulator, USB, for Arm – 8.08.00 J-Link should be the best for your needs!
  • Updated: August 8, 2021 — 12:24 am